If you want to use the Brakeaway with the Chrome Kury levers, part number Part #: KUR-7429 , you will need to modify it so the release cam hits the lever in the right spot. Some have cut away at their levers. I opted for a modification to the Brakeaway system which took me about five minutes--four of them just locating the right nut & bolt. I simply added a nut used here as a washer, and a new longer bolt. If you roll your cursor over the image, you'll see the underside. Here I removed the stock hex head bolts because when tightening them the head tends to strip way too easily. I found a perfect match with the discarded nuts from my Kury grips end caps which I replaced when I added the Throttle Boss. Note: You assume all risk for any modification to your bike, as I assume risk for what I do to mine. Brakeaway did not make a longer cam when I called them last, and they did NOT endorse my mod (for liability reasons).

Rear Plate

Cutaway for rear plate

This is Wyatt. Welcome to my VTX 1800 "C" home page. Click on the links above to visit different web pages I have designed to illustrate differences in add-on equipment. I'll be updating this whenever I test a new piece for my bike.